Grinding Mill
YGM High Pressure Mill
Capacity
0.4–22 （T/H）
Feeding Size
<35 mm
Finished particle size
80 - 425 Mesh (Adjustable)
Grinding Mill
Capacity
Feeding Size
Finished particle size
The YGM high-pressure suspension roller mill can process hundreds of materials with a Mohs hardness of less than 9.3 and a moisture content of less than 6%.
Based on the principle of suspended roller crushing, the grinding rollers exert pressure on the grinding ring through a spring-loaded pressure system within the main unit, thereby crushing the material. The crushed material is then conveyed by airflow and sorted by an integrated classifier. Qualified fine powder is collected, while coarse powder is returned for further grinding.
A high-pressure spring is installed on the grinding roller assembly to increase the initial grinding pressure.
Equipped with a high-precision turbine classifier to control the particle size of the finished product.
Employs a sealed gearbox and pulley drive.
The system operates under negative pressure and is equipped with a pulse-jet bag filter.
Brochure
| Model | Grinding Roller | Grinding Ring | Feeding Size (mm) |
Output Size(mm) | Capacity (t/h) | Motor Power (kw) |
Overall Dimension (mm) | |||
| Numbers (pcs) | Diameter (mm) | Height (mm) | Outside Diameter (mm) |
Height (mm) | ||||||
| YGM75 | 3 | 260 | 150 | 865 | 150 | ＜15 | 0.613-0.033 | 0.4-3.1 | 35.7 | 5000×4100×4850 |
| YGM85 | 3 | 270 | 140 | 907 | 140 | ＜20 | 0.613-0.033 | 0.5-4.0 | 42.7 | 5150×5000×5200 |
| YGM95 | 4 | 310 | 170 | 1050 | 170 | ＜25 | 0.613-0.033 | 1.1-5.6 | 72.5 | 7550×7400×8100 |
| YGM130 | 5 | 410 | 210 | 1400 | 210 | ＜30 | 0.613-0.033 | 2.2-9.5 | 172.5 | 8510×8000×9645 |
| YGM160 | 6 | 440 | 270 | 1740 | 270 | ＜35 | 0.613-0.033 | 8-22 | 275 | 12550×5700×8355 |
